4W Solar Panel Waterproof Micro Output 12V Solar Cells Charge Install 18650 Battery Outdoor For Hunting IP Camera 4G Rouer WIFI
4W Solar Panel Waterproof Micro Output 12V Solar Cells Charge Install 18650 Battery Outdoor For Hunting IP Camera 4G Rouer WIFI
Solar Panel Specification Selection
Please refer to our solar panel specifications to select the type of solar panel you require.
4W Solar Panel 3 In1 DC Output 12V Solar Cells Charger Built-in 18650 Battery For Outdoor security Camera IP66 Waterproof
This link does not include batteries!
NOTE
We have adjusted the position of the charging port, with its functionality remaining unchanged.You may receive different versions.
NOTE
Solar extended power supply for hunting cameras, however, does not provide 7X24 hour power for 12V CCTV cameras.
Batteries not included!!!If you can't buy 18650 batteries, do not purchase this product! Do not purchase it!!!
Main Features:
*【Batteries can be installed】There are 6 slots for 18650 batteries inside the solar panel, the slots are standard 18650 battery size, you can easily install the batteries.
*【Mcu Charge Management】Low power consumption MCU core processor, the whole panel charging and discharging for fine management, to ensure that the panel runs well.
*【Monocrystalline silicon solar panel cells】Solar cells use monocrystalline silicon, which has the highest conversion efficiency of 23%, to improve the efficiency of converting sunlight into electricity.
*【Constant Current Voltage Regulator Circuit PCB】Built-in PCBA to output stable 12V voltage from the battery through constant current circuit to supply your device and keep him running well.
*【Solar & DC power input】The panel can be charged in two ways, you can charge him via sunlight or you can also charge the battery in the panel via a 5V2A power adapter.
*【Iindicator lamps】The back of the panel is designed with 3 status indicators, making it easy to understand the working status of the panel as well as troubleshooting.
*【Outdoor waterproof IP66】The panel is designed for outdoor use and is waterproof to IP66.
*【Overcharge and Overdischarge】The overcharge voltage is 4.25V and the overdischarge voltage is 2.8V, which protects your battery more safely and prolongs the life of the battery.
FAQ
Q: Is the battery included?
A: Panel has 6 battery slots, you can choose you need.
Q: Use environment temperature
A：-10°-50°
Q：How to choose a battery?
A：Supports all 18650 batteries.
Q：Is there a requirement for battery capacity?
A：No limitations, high capacity, long charging time.
Q：How are the panels installed?
A：Please install the panel in a location with greater than 5 hours/day of sunlight.
Output Current
Output 12V-Max1A
Note: The maximum power peak is around 10W for continuous operation. It is recommended not to exceed 6-8W during operation.
Free software customization available.
Version 1: Night-OUTPUT&DAY-OFF
Version 2: Night-OFF&DAY-OUTPUT
The above two versions of customized software can be provided for free. If you need one of these modes, please leave us a message.
Note: The default delivered version is the one that outputs voltage continuously once powered on.
Device Power
Since the panel generates relatively little power, if it provides power for high-power devices, the rate at which the devices consume power is much greater than the rate at which the panel is charged.
If you need to work 7X24 hours, please keep your device power and working current less than the following reference values.
12V device: power 0.45W, current less than 40ma
About batteries
The solar panel can hold a maximum of 6 PCS batteries. Search for "18650 batteries" with no capacity limit; it is recommended to use batteries with 2500mAh or higher per cell. Both pointed-top and flat-top 18650 batteries are supported.
Note: The battery diameter must not exceed 18mm, otherwise it may not fit.
Note: This product does not include batteries. You need to purchase them separately.
2M Cble
Cable length: 2M, equipped with a 5.5×2.1mm plug. Three additional adapters are included: Micro USB, 3.5×1.35mm DC, and Type-C.
Cycle Work Diagram
Note: The panel will output power whenever the on button is pressed. When the battery level drops below 5%, the power supply will be automatically cut off; at this point, the solar panel will enter the charging standby mode and will not resume automatic power output until the battery level reaches 55%.
Steps 1 to 5 are the discharge process, and steps 6 to 11 are the charging process. Power output will be cut off during steps 6 to 9, and the output will be activated automatically when the battery reaches 100% charge at step 10.
Applicable Devices
This solar panel can power hunting cameras, low-power cameras for up to 365 days. It can also charge cell phones, outdoor small power products.
2A charging
Our charging current is 2A, which shortens the charging time, while other sellers only use 1A charging.
Multiple styles of input and output connectors.
IP66 TEST
We install two 18650 batteries inside the panel. After securing all waterproof plugs, power on the panel to activate it. Then submerge the panel in water for 30 minutes—it will continue to operate stably.
Batteries not included!!!If you can't buy 18650 batteries, do not purchase this product! Do not purchase it!!!
There are 6 slots for 18650 batteries, and you need to purchase the batteries yourself.
Charging Indicator
Charging LED: Indicates charging status.
Battery level percentage: Displays remaining power at 25/50/75/100%.
Output LED: Indicates power output status.
When the battery level drops below 5%, the protection program is activated to cut off the power output and wait for charging. The power output will be automatically resumed without manual intervention when the battery is charged to 55%. It features 24/7 cyclic operation.
Easy installation
When fixing the bracket, adjust the mounting angle as required.
Packing List
Solar Panel 1PCS
Fixed bracket 1PCS
Screws 1PCS
Instruction manual 1PCS
Screw accessory package 1 package
Battery needs to be purchased by yourself
Batteries not included!!!If you can't buy 18650 batteries, do not purchase this product! Do not purchase it!!!
Step1:Obtain the Actual Power of the Device
Actual Power = Rated Power on the Label × 0.3 - 0.5
For example, a router labeled "12V 1A" has a rated power of 12W. Its actual power is 12W × 0.3 = 3.6W, meaning it can operate with a 3.6W power supply.
Step 2: Determine the Total Daily Power Generation of the Solar Panel
Total Daily Power Generation = Power of the Solar Panel × 4 Hours
For example, a 25W solar panel has a total daily power generation of 25W × 4 Hours = 100Wh. This calculation is based on the global average sunshine duration of 4 hours per day.
Step 3: Configuration Instructions
The total daily power generated by the solar panel must be greater than the total daily power consumed by your device.
For example, a 25W solar panel generates 100Wh of power per day. A router consumes 3.6W of power, so its total daily power consumption is 3.6W × 24 Hours = 86.4Wh. Since 100Wh > 86.4Wh, the solar panel can support the router to operate 24 hours a day, 7 days a week.
Step 4: Instructions on the Battery
The total capacity of the battery is only related to the operating duration of your device on cloudy/rainy days or at night.
For example, installing 6 pieces of batteries instead of 4 pieces will allow your device to operate for a longer period.
